G. Fedale Roofing & Siding Blog

Minimum Slope for Roofing Shingles

What is the minimum slop for a shingle roof?

Minimum Slope Shingle Roof

What is the minimum slope for a shingle Roof ?

 

Shingles of all types need to have slope to function properly. The minimum requirement is 2/12. The 2/12 number is rise over run, or two units of vertical for every 12 units horizontal. That works out to about nine degrees if that works better for you. A shingle roof, like this garage in the photo above, may have failure, no matter how good a job the installer did. This minimum slope requirement can be found in the installation instructions for almost every manufacturer and in many building codes.

Normal Roof Slope for Typical Installation

Normal shingle installation is allowed for all roofs with a pitch of 4/12 and above.

Low Sloped Roof Shingle Installation

If 4/12 and above is normal and 2/12 is minimum, what about properties with roofs in between the two such as a 3/12 pitched roof? We do install shingles on these in between pitches but special application measures must be taken in this middle ground. You are required to have a double layer of asphalt saturated felt paper or a single layer of ice & water shield under your shingles. A word of caution: if you have a roof that is just above the minimum pitch, you still may better off using a different product than shingles.

Visit our website for more info.

Free Estimate? Call 302-225-7663 of 215-567-7663

 

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *